Valves Powered Mil-Specs - FSC 4810

A-A-52429 - Valve, Solenoid Operated

This CID establishes the requirements for a direct acting, poppet style, two-way shutoff solenoid operated valve for use on a military ground vehicle electronic drive system as an emergency bypass valve.

DOD-V-24657 - Valve Actuator, Direct Coupled, Gear Driven Electrically Powered For Naval Shipboard Propulsion And Auxiliary Systems (Metric)

This specification describes an electrically powered, directly coupled, gear driven valve actuator primarily for valves in main propulsion, auxiliary and cargo systems of Naval ships.

MIL-DTL-24694 - Valve, Hydraulic Relief, 1.5 - 35 Bars (22 - 500 Pounds Per Square Inch) Cartridge Type, General Specification (Metric)

This specification covers the requirements for cartridge-type relief valves for use in hydraulic systems with a maximum operating pressure of 35 bars [500 pounds per square inch (lb/in2)].

MIL-DTL-24695 - Valve, Hose Assembly, And Adapter, Vent And Test Hydraulic Service, General Specification For

This specification covers vent and test valves, hose assemblies, and adapters suitable for hydraulic service to a maximum operating pressure of 310 bars [4,500 pounds per square inch (lb/in2)].

MIL-DTL-24695/1 - Valve, Vent And Test Hydraulic Service

MIL-DTL-24695/2 - Vent And Test Valve Hose Assembly Hydraulic Service

MIL-DTL-24695/3 - Vent And Test, Hose Assembly Adapter

MIL-R-2963 - Valves, Globe Type And Angle Type, Electric Motor Operated, Hanger And Turret Sprinkling

MIL-STD-2193 - Ship Hydraulic System Components

This standard provides design, construction, and testing requirements that are common to most components used in ship hydraulic (power transmission and control) systems. This standard does not establish configuration requirements, pressure, flow, or performance requirements for any specific component.

MIL-V-15508 - Valve, Remote Control, Diaphram Actuated (Fluid Systems, 150 And 250 P.S.I W.P. 140 Deg. F. Maximum)

This specification covers diaphragm actuated, globe and angle remote control valves, for use in fluid systems where quick opening and closing of supply lines and resistance to salt water corrosion is required.

MIL-V-16556 - Valve, Solenoid, Three-Way Bypass (Naval Shipboard Use)

This specification covers three-way bypass valves, solenoid operated, for use as salinity actuated dump valves.

MIL-V-17501 - Valves, Control Type, Magazine, And Hangar Deck Sprinkler

This specification covers magazine and hangar deck sprinkler control type valves for shipboard service.

MIL-V-17513 - Valve, High Pressure, Globe And Angle, Steel 600 Lbs W.S.P. And 850 Deg F. Max. Temp. (Shipboard Use) (Use Mil-V-22052 Or Mil-V-22094)

MIL-V-19593 - Valve-Control, Aircraft Pneumatic 28 Volt D-C Solenoid Operated

MIL-V-20231 - Valves, Gate, For Air-Exhaust-Steam, Oil, Or Water Services (Shipboard Use) (Use Mil-V-1189 And Mil-V-18110)

MIL-V-21326 - Valves, Gate, Hydraulically Operated, Over 4-Inch Nps, Nuclear Plant Service

MIL-V-21340 - Valve, Globe, Air Operated, Nuclear Plant Service

MIL-V-21351 - Valves, Check, Horizontal Swing, Over 4-Inch Nps, Nuclear Plant Service

MIL-V-21375 - Valves, Globe And Gate, Hydraulically Operated, Nuclear Plant Service

MIL-V-21644 - Valve, Globe, Solenoid Operated, Nuclear Plant Service

MIL-V-21647 - Valve, Pilot, 4 Way, Flow Directing, Nuclear Plant Service

MIL-V-22854 - Valves, Angle, Shut-Off, Packed, Receiver, Refrigerant-12

This specification covers one type of manually operated shut-off valve for use with Refrigerent-12 (see 6.1).

MIL-V-24642 - Valve, 2-Inch Nps, Auxiliary Turbine Overspeed Trip, Solenoid Activated

This specification covers the design and manufacture of solenoid activated turbine trip valves.

MIL-V-24694/1 - Valve, Hydraulic Relief, 1.5 - 35 Bar, 150 Lpm Cartridge Type (Metric)

MIL-V-24694/2 - Valve, Hydraulic Relief, 1.5 - 35 Bar, 10 Lpm Cartridge Type (Metric)

MIL-V-24722 - Valve And Subplate, Servo Flow-Control, Electrohydraulic, General Specification For

This specification covers the requirements for electrohydraulic, flow-control servovalves and their associated subplates. This type of valve will be installed into a closed-loop, position control servosystem. The valves are designed for either standard or quiet operation and utilize quill-type or face seal mounting configurations.

MIL-V-24722/1 - Valve And Subplate, Servo Flow-Control, Electrohydraulic For 0 To 50 Gallons Per Minute (Gpm) And 0 To 80 Gpm Flow Ranges

MIL-V-24722/2 - Valve, Servo Flow-Control, Electrohydraulic For 0 To 10 Gpm Flow Range

MIL-V-24722/3 - Valve And Subplate, Servo Flow-Control, Electrohydraulic For 0 To 80 Gpm

MIL-V-25075 - Valve, Direction, Fire Extinguishing System, Type Mc&1

This specification covers one type of fire extinguishing system direction valve, disingated Type MC-1.

MIL-V-47308 - Valve, Servo, Hydraulic Flow Control

MIL-V-47320 - Valve, Fluid Injection, Solenoid Operated

MIL-V-52049 - Valve, Pressure Operated

MIL-V-52050 - Valve, Pressurizing, Solenoid Operated

MIL-V-62381 - Valve, Solenoid Operated (S/S By A-A-52429)

MIL-V-7484 - Valve, Diverter, Lubricating Oil Tank

MIL-V-8610 - Valve, Fuel Shutoff Solenoid Operated, 28 Volt Dc

This specification covers solenoid-operated, hydrocarbon fuel shutoff valves.

MS17841 - ( Images) Valves, Solenoid, Refrigerant-12

MS29527 - ( Images) Valve, Fuel Shutoff Solenoid Operated, 28-Volt Dc 60-Psi Operating Pressure

QPL-15508-13 - Valves, Remote Control, Diaphragm Actuated (Fluid Systems, 150 And 250 P.S.I. W.P. 140 Degrees F Maximum (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-16556-13 - Valve, Solenoid Three-Way Bypass (Naval Shipboard Use)

QPL-17501-13 - Valves, Globe, Hydraulically Operated, Piston And Diaphragm Type, Magazine And Hangar Deck Sprinkling

QPL-24695-3 - Valve Hose Assembly, And Adapter, Vent And Test Hydraulic Service, General Specification For (Metric) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-25075-4 - Valve, Direction, Fire Extinguishing