MIL-V-24642(SH)
13 September 1984
MILITARY SPECIFICATION
VALVE, 2-INCH NPS, AUXILIARY TURBINE OVERSPEED TRIP, SOLENOID ACTIVATED
This specification is approved for usc by the Naval Sea Systems
Command, Department of the Navy, and Is available for use by all
Departments and Agencies of the Department of Defense.
SCOPE
1.
1.1 Scope. This specification covers the design and manufacture of
solenoid activated turbine trip valves.
1.2 Classification. Valve ratings shall be of the 600 pound class and
1,500 pound class in accordance with ANSI B16.34 as specified (see 6.2.1).
2.
APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. Unless otherwise specified, the
following specifications and standards of the issue listed in that issue of
the Department of Defense Index of Specifications and Standards (DoDISS)
specified in the solicitation form a part of this specification to the extent
specified herein.
SPECIFICATIONS
MILITARY
MIL-S-901
- Shock Tests, H.I. (High-Impact); Shipboard
Machinery, Equipment and Systems, Requirements
for.
MIL-A-907 - Antiseize Compound, High Temperature.
MIL-R-17131 - Rods and Powders, Welding, Surfacing.
MIL-E-17555 - Electronic and Electrical Equipment Accessories,
and Repair Parts; Packaging and Packing of.
MIL-G-21032 - Gaskets, Metallic-Asbestos, Spiral Wound.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy,
Washington, DC 20362 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter.
FSC 4810
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business