A-A-52429A(AT)
cleanliness should be verified and evidence of inspection and acceptance provided. Precision
cleaned articles should be packaged immediately after verification of cleanliness, or suitably
protected prior to leaving the controlled environment.
5.3.1 Precision cleaning solutions/fluids. Precision cleaning solutions or material should not
react with, combine with, etch, or otherwise cause immediate or latent degradation of the item
being cleaned. Precision cleaning fluids should be filtered, and controlled. Their cleanliness
level should be verified as being sufficient to achieve the specified product cleanliness.
5.4 Cross-reference data. Solenoid valves conforming to this CID are interchangeable/
substitutable with solenoid valves conforming to MIL-V-62381A(AT), dated 18 December 1985.
5.5 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials to
the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition
Regulation (FAR) (see 2.1).
5.6 Metric product. The solenoid operated valves made to metric dimensions will be considered
on the following basis:
a. Products manufactured to metric dimensions will be considered on an equal basis
with those manufactured using inch-pound units, provided they fall within specified
tolerances using conversion tables contained in the latest revision of IEEE/ASTM
SI 10, and all other requirements of this CID are met.
b. If a product is manufactured to metric dimensions and those dimensions exceed the
tolerances specified in the inch/pound units, a request should be made to the
contracting officer to determine if the product is acceptable.
c. The contracting officer has the option of accepting or rejecting the product.
Custodian:
Preparing Activity:
Army - AT
Army - AT
(Project 4810-2009-002)
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the currency
of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business