METRIC
MIL-DTL-24694A(SH)
4 October 2011
SUPERSEDING
MIL-V-24694(SH)
28 October 1987
DETAIL SPECIFICATION
VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS
(22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE,
GENERAL SPECIFICATION FOR (METRIC)
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for cartridge-type relief valves for use in hydraulic
systems with a maximum operating pressure of 35 bars [500 pounds per square inch (lb/inē)].
1.2 Classification. Cartridge-type relief valves are furnished in the sizes, adjustment type, and pressure settings
(classes) listed in the applicable specification sheet.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-N-281
-
Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and
Structural and Special Shaped Sections
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment and
Systems, Requirements for
MIL-PRF-6083
-
Hydraulic Fluid, Petroleum Base, For Preservation and Operation
MIL-PRF-17331
-
Lubricating Oil, Steam Turbine and Gear, Moderate Service
MIL-PRF-17672
-
Hydraulic Fluid, Petroleum, Inhibited
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 4810
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business