MIL-V-15508B
25 January 1971
SUPERSEDING
MIL-V-15508A
15 April 1952
(See 6.5)
MILITARY SPECIFICATION
VALVES, REMOTE CONTROL, DIAPHRAGM ACTUATED
(FLUID SYSTEMS, 150 and 250 P.S.I. W.P. 140°F. MAXIMUM)
This specification is mandatory for use by all Departments and Agencies
of the Department of Defense.
SCOPE
1.
This specification covers diaphragm actuated, globe and angle remote
1.1 Scope.
control valves, for use in fluid systems where quick opening and closing of supply lines
and resistance to salt water corrosion is required.
Valves shall be of the following types, classes and sizes as
Classification.
1.2
#
specified (see 6.1).
Type I - Globe.
Type II - Angle,
Class A - 150 pounds per square inch (p.s.i.) service.
Class B - 250 p.s.i service.
Sizes - Valves shall be 3/8 inch through 16 inches iron pipe size (i.p.s.).
2.
APPLICABLE DOCUMENTS
2.1 The following documents of the issue in effect on date of invitation for bids or
#
request for proposal, form a part of the specification to the extent specified herein.
SPECIFICATIONS
FEDERAL
O-F-555 - Foam Liquid, Fire Extinguishing, Mechanical.
Rod, Wire, Shapes, Forgings, and Flat Products
QQ-B-637 - Brass, Naval:
with Finished Edges (Bar, Flat Wire, and Strip).
OQ-N-281 - Nickel-Copper-Alloy , Bar, Plate, Rod, Sheet, Wire, Forgings
and Structural and Special Shaped Sections.
QQ-N-288 - Nickel-Copper Alloy and Nickel-Copper-S~llcon Alloy Castings.
OQ-W-321 - Wire, Copper Alloy,
QQ-W-390 - Wire: Ni.ckel-Chromium-Iron Alloy.
QQ-W-470 - Wire, Steel, High Carbon, Spring, Bright, Music.
MILITARY
MIL-V-3 - Valves, Fittings and Flanges (Except for Systems Indicated Herein);
Packaging of.
MIL-R-196 - Repair Parts for Internal Combustion Engines, Packaging of,
MIL-B-857 - Bolts, Nuts, and Studs.
MIL-S-901 - Shock Tests, H.I. (High-Impact) ; Shipboard Machinery, Equipment,
and Systems, Requirements for.
MIL-D-1000 - Drawings, Engineering and Associated Lists.
MIL-D-1000/2 - Drawings, Engineering and Associated Lists.
MIL-F-1183 - Fittings, Tube, Cast Bronze, Silver-Brazing.
MIL-E-2036 - Enclosures for Electric and Electronic Equipment, Naval
Shipboard.
MIL-C-2212 - Controllers, Electric Motor, A.C. or D.C. and Associated
Switching Devices, Naval Shipboard,
MIL-R-2765 - Rubber Sheet, Strip, Extruded, and Molded Shapes, Synthetic,
Oil Resistant.
MIL-C-6183 - Cork and Rubber Composition Sheet; for Aromatic Fuel and
Oil Resistant Gaskets.
FSC 4810
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business