MIL-STD-2193 Ship Hydraulic System ComponentsThis standard provides design, construction, and testing requirements that are common to most components used in ship hydraulic power transmission and control systems. This standard does not establish configuration requirements, pressure, flow, or performance requirements for any specific component.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

MIL-STD-2193C(SH)

2.3  Non-Government publications.  The following documents form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

AEROSPACE INDUSTRIES ASSOCIATION (AIA)

NAS1351                     -            Screw, Cap, Socket Head, Undrilled and Drilled, Plain and Self-Locking, Alloy Steel, Corrosion-Resistant Steel and Heat-Resistant Steel, UNRF-

3A

NAS1352                     -            Screw, Cap, Socket Head, Undrilled and Drilled, Plain and Self-Locking, Alloy Steel, Corrosion-Resistant Steel and Heat-Resistant Steel, UNRC-

3A and UNRC-2A

NASM7838                  -            Bolt, Internal Wrenching, 160 KSI FTU NASM8846                  -            Inserts, Screw-Thread, Helical Coil

NASM17829                -            Nut, Self-Locking, Hexagon, Regular Height, 250 Deg F, (Non-Metallic

Insert) Non-Corrosion-Resistant Steel

NASM17830                             Nut, Self-Locking, Hexagon-Regular, 250 Deg F, and 450 Deg F (Non- Metallic Insert), 300 Series Corrosion Resistant Steel

NASM20995                -            Wire, Safety or Lock

NASM25027                -            Nut, Self-Locking, 250 Deg F, 450 Deg F, and 800 Deg F NASM33540                -            Safety Wiring, Safety Cabling, Cotter Pinning, General Practices for NASM33547                -            Pins, Spring, Functional Limitations of

(Copies of these documents are available from Aerospace Industries Association, 1000 Wilson Boulevard, Suite

1700, Arlington, VA  22209-3901 or online at www.aia-aerospace.org.)

ASME INTERNATIONAL

ASME B18.2.2            -            Nuts for General Applications:  Machine Screw Nuts, Hex, Square, Hex

Flange, and Coupling Nuts (Inch Series)

ASME B18.3               -            Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch

Series)

ASME B46.1               -            Surface Texture (Surface Roughness, Waviness, and Lay) ASME Y14.100           -            Engineering Drawing Practices

(Copies of these documents are available from ASME International, 22 Law Drive, P.O. Box 2900, Fairfield, NJ

07007-2900 or online at www.asme.org.)

ASTM INTERNATIONAL

ASTM A193/A193M     -          Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A194/A194M     -          Standard Specification for Carbon and Alloy Steel Nuts for Bolts for

High Pressure or High Temperature Service, or Both

ASTM A563                  -          Standard Specification for Carbons and Alloy Steel Nuts

3