MIL-DTL-24695C(SH)
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, HI (High-Impact); Shipboard Machinery, Equipment and
Systems, Requirements for
MIL-PRF-17331
-
Lubricating Oil, Steam Turbine and Gear, Moderate Service
MIL-PRF-17672
-
Hydraulic Fluid, Petroleum, Inhibited
MIL-H-19457
-
Hydraulic Fluid, Fire-Resistant, Non-Neurotoxic
MIL-H-22072
-
Hydraulic Fluid, Catapult, NATO Code Number H-579
MIL-DTL-24695/l
-
Valve, Vent and Test Hydraulic Service
MIL-DTL-24695/2
-
Vent and Test Valve Hose Assembly Hydraulic Service
MIL-DTL-24695/3
-
Vent and Test, Hose Assembly Adapter
DEPARTMENT OF DEFENSE STANDARDS
Mechanical Vibration of Shipboard Equipment, (Type I Environmental and
MIL-STD-167-1
-
Type II Internally Excited)
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or https://assist.dla.mil.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM A276
-
Standard Specification for Stainless Steel Bars and Shapes
(Copies of this document are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
SAE INTERNATIONAL
SAE AMS-QQ-S-763
-
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
SAE AS3581
-
Packings, Preformed-O-Ring Seal, AMS 7259
(Copies of these documents are available from SAE World Headquarters, 400 Commonwealth Drive, Warrendale,
PA 15096-0001 or online at www.sae.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with
the applicable specification sheet. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Qualification. Vent and test valves, hose assemblies, and adapters furnished under this specification shall
be products that are authorized by the qualifying activity for listing on the applicable qualified products list at the
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business