MIL-V-47308A (MI)
Except as otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for the
performance of the inspection requirements specified herein, unless
The Government reserves the right to perform
disapproved by the Government.
any of the inspections set forth in this specification where such inspections
are deemed necessary to ensure supplies and services conform to prescribed
requirements.
All items shall meet all
Responsibility for compliance.
4.1.1
requirements of sections 3 and 5.
The inspection set forth in this
specification shall become a part of the contractor's overall inspection
system or quality program. The absence of any inspection requirements in the
specification shall not relieve the contractor of the responsibility of
ensuring that all products or supplies submitted to the Government for
Sampling inspection,
acceptance comply with all requirements of the contract.
as part of manufacturing operations, is an acceptable practice to ascertain
conformance to requirements, however, this does not authorize submission of
known defective material, either indicated or actual, nor does it commit the
Government to accept defective material.
4.2
Classification of inspections.
The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.4)
Quality conformance inspection (see 4.5).
b.
4.3
Inspection conditions. Unless otherwise specified, all inspection
conditions shall be performed in accordance with the conditions of 4.3.1,
4.3.2, 4.3.3 and 4.3.4.
Tempe rature.
4.3.1
Temperature shall be room ambient 26.7
4.3.2 Barometric pressure.
Barometric pressure shall be facility
ambient 28 to 32 inches of mercury (in Hg).
4.3.3
Humidity.
Relative humidity shall be not greater than 95
percent.
4.3.4
Fluid.
Fluid media shall be in accordance with 3.3.2.
4.4 First article inspe ction.
First article inspection shall consist
of the examination and tests as specified in table I and shall be conducted in
the order specified in table II. Quantity production shall be withheld until
the first article sample has been pronounced satisfactory by the procuring
activity (see 3.1 and 6.3).
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business